1/32 Ninco Analog Track - "Power-N" 3 -Amps - Adjustable Power Supply for all Brands of Analog Track READ MORE INFO FOR VIP INSTRUCTIONS!

Second generation of NINCO's 8~20VDC variable power supply for analog tracks. Current increased to 3A to accommodate higher powered motors. Additional circuit protection and overload tolerance allows low-range short circuits without auto reset.

With this "Power-N", you will be able to tailor the track voltage to alter the driveability of your cars, especially if younger drivers are using the track.

Power-N Power supply is an 8-20VDC (1/10vdc adjustable) power supply that is designed to replace the fixed-power "wall-wart" power supply that comes in analog sets, providing equal power to both lanes of the track.

It has two 8-20v, 3 amp adjustable outputs*, and two fixed 12v, .5 amp outputs* to provide DC power to your track.

You can use your own cables with banana or spade lug connectors on the output terminals, or simply use the "hard wired" cables* already attached to the power supply. These "hard wired" cables terminate in a standard NINCO connector that plugs into a normal NINCO Power track.

*CONNECT EITHER ONE 8-20V OUTPUT TO THE TRACK, OR ONE FIXED 12V OUTPUT... DO NOT CONNECT BOTH!