Below is a chart, courtesy of Carrera USA, that show which motors go with which rear axles for specific cars.
Please note that the letter Z stands for teeth. Thus, a Z10 motor means the gear on the motor has 10 teeth. A Z50 rear axle means that the gear on the axle has 50 teeth.
According to Carrera "it is not possible to mix the combinations!" In other words the total amount of teeth in any tuning motor / rear axle combination MUST equal 60. Only Z10 motors go with Z50 motors because that combination totals 60 teeth. Other combinations: Z12 motors / Z48 rear axles, Z14 motors and Z46 rear axles.
Rear Axle Complete - Check out our Carrera 1/24 Exclusiv
Rear Axles
| Z50 |
Z48 |
Z46 |
1/24 Carrera Slot Car |
| 83010 |
83019 |
83028 |
Ferrari 575 GTC |
| 83011 |
83020 |
83029 |
Ferrari 250 GT SWB |
| 83012 |
83021 |
83030 |
Ferrari 330 P4, Rim Blue |
| 83013 |
83022 |
83031 |
Ferrari 330 P4, Rim Gold |
| 83014 |
83023 |
83032 |
Chevrolet Corvette C6R, Rim Silver |
| 83015 |
83024 |
83033 |
Chevrolet Corvette C6R, Rim Gold |
| 83016 |
83025 |
83034 |
Porsche Carrera 6 |
| 83017 |
83026 |
83035 |
Hot Rod, Rim Design "A" |
| 83018 |
83027 |
83036 |
Hot Rod, Rim Design "B" |
| 83046 |
83048 |
83050 |
Chevrolet Corevette C6R, Rim Chrome-Plated |
| 83047 |
83049 |
83051 |
Ferrari 330 P4, Rim Light Blue |
Motors - Check out our Carrera 1/24 Exclusiv
Motors
in our catalog.
| Z10 |
Z12 |
Z14 |
Motors |
| 83000 |
83002 |
83004 |
Standard motor, 18000 rpm |
| 83001 |
83003 |
83005 |
Tuning Motor 24000 rpm |
Tuning Tires - Check out our Carrera 1/24 Exclusiv
Tuning Tires
in our catalog.
83040 - Chevrolet Corvette C6R, Ferrari 575 GTC
83041 - Ferrari 250 GT SWB
83042 - Ferrari 330 P4
83043 - Porsche Carrera 6
83044 - '34, '41 Hot Rods with fenders
83045 - '34 Hot Rods, without fenders (wide base tires)
Courtesy of Carrera USA
